Guest post by Dalibor
Chargers shown in the cover picture above are used for a set of LiPo batteries that I use. The charger on the right is used for balancing. The one on the left is used as a primary, while the one in the middle is a reserve. Each of these chargers has different characteristics and by combining them it is possible to charge batteries faster, to charge them automatically and balance them.
A recommendation for a set of LiPo batteries with a 24 V, 10 Ah automatic chargers. Batteries are 2×24 V, 5 Ah.
![LiPo battery set with 24 V and 5 Ah each](https://bike.bikegremlin.com/wp-content/uploads/2020/06/02-lipo-batteries-24V10Ah.jpg)
A quality made charger, reliable and fully automatic:
![Automatic battery charger – from the front](https://bike.bikegremlin.com/wp-content/uploads/2020/06/03-electric-bicycle-battery-charger-frontal.jpg)
![The rear side of the automatic battery charger](https://bike.bikegremlin.com/wp-content/uploads/2020/06/03-battery-charger-from-the-rear.jpg)